AP Automation

The Siemens 6ES7132-7GD10-0AB0 is a SIMATIC DP electronic module specifically designed for the ET200iSP system. It's a 4-channel digital output module, meaning it can control up to four separate output devices. The module is rated for 17.4V DC at 27mA and features "L"-shutdown, which likely refers to a specific type of output shutdown or protection mechanism. It's also designed for use in hazardous locations, specifically Ex ib (ia Ga) IIC T4 Gb and Ex ib [ia IIIC...], indicating its suitability for explosive atmospheres.

The Siemens 6ES7138-7FA00-0AB0 is a SIMATIC ET 200iSP fail-safe electronic module designed for connecting 2-wire HART transmitters in hazardous areas. It is specifically a 4-channel analog input module with HART functionality, supporting up to Category 4 (EN954-1)/SIL3 (IEC61508)/PLE (ISO13849) safety levels. The module supports HART protocol version 7.0 and is suitable for use in Ex ib (ia Ga) IIC T4 Gb, Ex ib [ia IIIC Da] IIC T4 Gb, and Ex ib [ia] I environments.

The Allen-Bradley 1769-IT6K is Programmable Controller module that is part of the compact I/O series. This module is Thermocouple and millivolt input module that features Six (6) channels that is compatible with Thermocouple sensors J, K, T, E, R, N, S, B, N, C and CJC sensor and accepts +/- 50mV and +/-10mv with operating range of -50 to +50mV and -10 to +10mV signals. It is compatible for use with CompactLogix and MicroLogix controllers.

The 2085-OV16 output module is an Allen-Bradley expansion output module from the Micro 850 series. It is manufactured to add 16 outputs to an Allen-Bradley Micro 850 series controller. The 2085-OV16 expansion output module has 16 sink transistor outputs that support voltage ratings of 12/24 Volts DC. The operating voltage range supported by this output module is from 10 to 30 Volts DC. The 2085-OV16 expansion output module has an IP 20 environmental protection rating.

The Allen-Bradley 1738-AENTR Adapter is an ArmorPoint I/O 2-Port EtherNet/IP Series A Adapter. It supports a maximum of 63 modules, 5 rack-optimized connections, and 20 direct connections. This adapter has an enclosure type rating that meets the IP 65, 66, 67, and 69K standards (when marked).

The 1756-IA16I is a ControlLogix Discrete input module which operate at a voltage category of 79 to 132V AC at a frequency of 47 to 63 Hz. This module has Sixteen (16) individually isolated channels. This module is directly installed to a 1756 local or remote chassis.

The Allen-Bradley 1756-IB16I is a ControlLogix discrete input module. It features Sixteen (16) individually isolated input channels. Each channel operates at an input voltage signal range of 10-30VDC with nominal signal voltage of 24VDC. It is compatible for use with any ControlLogix chassis and uses the 1756-TBCH and 1756-TBS6H Removable Terminal Block (RTB).

This Allen-Bradley/Rockwell Automation 14 A AC drive comes with a rating of 10 HP. Also, this VFD is a 7.5 kW rated VFD. It is a size C frame unit and is contained in an IP66 enclosure. This drive has an enhanced module included on the drive. This PowerFlex 70 AC drive is a 480 VAC (50 Hz) drive.

This VFD made by Allen Bradley comes with a ND output rating of 5.5 kW. This adjustable frequency drive has a horsepower ND output rating of 7.5 HP. This PF70 additionally, is a 11.5 A rated drive. It is a 400 VAC (50 Hz) VFD. It comes with a C frame size and comes with a blank cover instead of the HIM.

The Allen-Bradley 22B-V6P0H204 AC Drive operates with a 120AC Volts Voltage and 6.0 A. It has 1.5 Horsepower and a Replacement Plate Drive - IP20, NEMA/UL Type Open (Without Heatsink) Enclosure.

The Allen-Bradley/Rockwell Automation 22B-E1P7H204 drive is a 3-phase AC-powered adjustable frequency drive. It is available through the Allen-Bradley PowerFlex 40 drive series. The 22B-E1P7H204 adjustable frequency drive operates with a high 3-phase input power rating of 600 Volts AC and with an input frequency rating of 50 to 60 Hertz. This drive does not have a filter, but it can be installed in an IP 20 rated enclosure for protection and it comes with a control keypad on its front panel. The 22B-E1P7H204 adjustable frequency drive’s ambient operating temperature range is from 14 to 104 degrees Fahrenheit or from 14 to 122 degrees Fahrenheit depending on the system and the type of enclosure that it is installed in.

The Allen-Bradley/Rockwell Automation 22B-B5P0C104 drive is an adjustable frequency drive from the PowerFlex 40 drive series. It is an AC-powered adjustable frequency drive with a 3-phase voltage rating of 240 Volts AC. The 22B-B5P0C104 adjustable frequency drive is protected by an IP 66 rated NEMA Type 4 enclosure. It does not come with a built-in filter. The 22B-B5P0C104 adjustable frequency drive supports 5 Amps of current and 1 Horsepower of maximum output power.

The Allen-Bradley 22B-B033F104 drive is a PowerFlex 40 series adjustable frequency drive that operates with 3-phase AC input voltage. Its input voltage rating is 240 Volts AC at 50 to 60 Hertz of rated input frequency. The 22B-B033F104 adjustable frequency drive can support up to 33 Amps of output current. It can also support up to 10 Horsepower or 7.5 kilowatts of output power under ideal operating conditions. The 22B-B033F104 adjustable frequency drive can operate in a temperature range from 32 to 140 degrees Fahrenheit and it can be stored in a temperature range from -40 to 185 degrees Fahrenheit.

The Allen-Bradley 22B-A012H204 drive is a single-phase AC-powered adjustable frequency drive. It has been designed and manufactured as part of the Allen-Bradley PowerFlex 40 series. The 22B-A012H204 adjustable frequency drive operates with 240 Volts AC of single-phase input voltage at 50 to 60 Hertz of rated frequency. It uses its adjustable output frequency to change the speed and torque ratings of a motor in a PLC system. The 22B-A012H204 adjustable frequency drive can be mounted on a flange and it has an IP 20 rated protective enclosure.

The Allen-Bradley/Rockwell Automation 22D-E1P7H204 drive is an adjustable frequency drive from the PowerFlex 40P series. It is used to control the speed and torque ratings of industrial motors in different applications in Allen-Bradley PLC systems. The 22D-E1P7H204 adjustable frequency drive has an input voltage rating of 600 Volts AC at 50 to 60 Hertz frequency. It uses 3-phase AC voltage and it does not come with a filter. The 22D-E1P7H204 adjustable frequency drive generates 1 Horsepower or 0.75 kilowatts of output power during operation.

The Allen-Bradley/Rockwell Automation 22D-B033H204 drive is a PowerFlex 40P series adjustable frequency drive. It can generate 7.5 kilowatts or 10 Horsepower of output power during normal operation in all of the required environmental conditions. The 22D-B033H204 adjustable frequency drive does not come with a built-in filter but it has a Size C frame. It supports up to 33 Amps of output current. The 22D-B033H204 adjustable frequency drive can be programmed through an external human-machine interface.

The Allen-Bradley 22D-B017H204 drive is an AC-powered adjustable frequency drive from the PowerFlex 40P series. It is a plate type of drive with a Size B frame. The 22D-B017H204 adjustable frequency drive can increase or decrease the operating speed and torque of a motor by increasing or decreasing the level of frequency that it applies to the motor. Its output current rating is 17.5 Amps and its input voltage rating is 240 Volts AC (3-phase). The 22D-B017H204 adjustable frequency drive does not have a CE-compliant filter.

The Allen-Bradley 25C-E9P9N104 drive is an adjustable frequency drive and a motor control drive from the Allen-Bradley PowerFlex 527 series. It controls motors through its adjustable frequency. The 25C-E9P9N104 adjustable frequency drive can use its adjustable frequency to adjust the connected motor�s speed and torque ratings. It operates with 3-phase AC voltage which includes 525 to 600 Volts AC input voltage and 0 to 575 Volts AC. The 25C-E9P9N104 adjustable frequency drive comes with a Size C frame.

The 2715P-B7CD-B terminal is an operator terminal that has been designed to be used in different industrial processes as a strategic unit for supervising and checking the status of the application process and machinery without needing to be in the same place where the equipment is installed or where the application process is taking place.

The 2711P-B6C5A8 operator interface terminal is an Allen-Bradley/Rockwell Automation operator interface terminal from the Panelview Plus 6 series. It can be controlled either through its keypad or through its touchscreen. The backlight for the touchscreen is not replaceable. The 2711P-B6C5A8 operator interface terminal operates with AC input voltage and it has 256 MB of RAM and 512 MB of non-volatile memory.

The Allen-Bradley/Rockwell Automation 22A-V4P5H204 drive is an adjustable frequency drive from the PowerFlex 4 drive series. It operates with single-phase AC voltage. The input voltage rating of the 22A-V4P5H204 adjustable frequency drive is 120 Volts AC at a frequency range between 50 and 60 Hertz. Its output current rating is 4.5 Amps. The 22A-V4P5H204 adjustable frequency drive should be protected from static because it contains several components that are susceptible to static damage.