AP Automation

The Allen-Bradley 2085-OA8 output module is an expansion output module from the Allen-Bradley/Rockwell Automation Micro 850 series. Its outputs are triac outputs that are rated at 120/240 Volts AC voltage. The 2085-OA8 expansion output module is made to connect to a Micro 850 series controller to provide the controller with 8 extra triac outputs. The environmental protection rating of this expansion output module is IP 20. The 2085-OA8 expansion output module operates with a 120 Volts AC power supply at 50 to 60 Hertz frequency.

The Allen-Bradley 1756-IC16 is a Discrete Input module. This module is a Sixteen (16) channel module with Eight (8) inputs per group, accepting voltage signal range of 30-60VDC with nominal value of 48VDC. It is a single slot module that requires a removable terminal block such as 1756-TBNH and 1756TBSH.

The Allen-Bradley 25B-E032N104 drive is an adjustable frequency drive from the PowerFlex 525 product line. Its 3-phase input voltage range is from 525 to 600 Volts AC and its 3-phase output voltage range is from 0 to 575 Volts AC. The 25B-E032N104 adjustable frequency drive fits a Size E frame and it is equipped with a standard type of interface module. In normal duty applications, this drive generates 30 Horsepower or 22 kilowatts of output power. In heavy-duty applications, the 25B-E032N104 adjustable frequency drive generates 25 Horsepower or 18.5 kilowatts of output power.

The Allen-Bradley 1762-IQ32T is a MicroLogix 1200 Discrete input module. This module features Thirty-Two (32) input channels in Four (4) isolated groups of Eight (8) channels each. This module accepts 10-30VDC voltage signal range with minimum On-state voltage range of 10VDC. This module supports sink and source wiring configuration. This module is compatible for use with MicroLogix 1100, 1200, and1400.

The Allen-Bradley 1734-IR2E is a POINT I/O Analog Temperature Input Module. It has 2 high resolution RTD Inputs and a Data Format of Signed Integer with an Input Resolution of 16 bits. This Analog Temperature Input Module has a 1 Watt Power Dissipation.

The Allen-Bradley 1734-OB8 is a POINT IO module that features Eight (8) Discrete, non-isolated sourcing output channels. It has One (1) group of channels with Eight (8) outputs per channel. It delivers a nominal actuating voltage of 24VDC and compatible with any POINT IO communication adapter for implementing distributed I/O architecture. This module requires 1734-TB or 1734-TBS wiring base assembly.

The Allen-Bradley 5069-OBV8S is a Compact 5000 Digital 8-point Safety Sourcing Output Module. This module features Eight (8) output channels that operates at voltage range of 17.5-32VDC. It provides output current of 1 A per channel. This module is rated SIL CL3, PLe, Cat. 4 with safety reaction time of 4.5 ms .

The Allen-Bradley 5069-OW16 is a Compact 5000 relay output module. This module features Sixteen (16) Form A, Normally Open (N.O.) relay output channels in Two (2) groups of Eight (8) channels each. This module operates at 5-125VDC and 5-264VAC. It has a switching frequency of 1 operation every 3 seconds (0.3 Hz at rated load). This module has output current of 8 A per group and 16 A per module.

The Allen-Bradley 5069-SERIAL is a Compact 5000 Serial communication module. This module is compatible with CompactLogix 5380, Compact GuardLogix 5380 and CompactLogix 5480 controllers functioning as local and remote module and ControlLogix 5580 and GuardLogix 5580 as remote module only. This serial communication module features Two (2) isolated 9 Pin sub-D connector type serial interface that supports Generic ASCII, Modbus RTU/ASCII (Master/Slave), DF1 and DH-485 communication protocols.

The 5094-IB16SXT is a Safety Digital 16-point Sinking Input Module manufactured by Allen-Bradley which has an On-state voltage range of 10...32V DC, an On-state current, @ on-state min voltage of 2.4 mA @ 10V, and an 2.4 mA @ 10V of 2.5 mA @ 24V as well as an On-state current, @ on-state max voltage of 2.8 mA @ 32V. The Off-state voltage, max for this module is 5V DC, and the Off-state current, max is 1.5 mA. The Sensor Actuator Power (SA) voltage range for this model are 18...32V DC .

The 5094-OW8IXT is a Safety Digital 4-point Isolated Relay Output Module manufactured by Allen-Bradley which has an Relay rating of 2 A resistive/channel @ 5...30V DC 2 A resistive/channel @ 5...240V AC, 50/60 Hz 2 A general/channel @ 5...240V AC, 50/60 Hz 2 A ATEX/IECEx @ 5...240V AC, 50/60 Hz, an Off-state leakage of 0 mA (dry contact, no onboard snubbers), and an Output current rating, max of 2 A per channe as well as a Output delay time, max for Off to On and On to Off of 10 ms 10 ms. The Initial contact resistance, max for this module is 30 mΩ, and the Bounce time, mean is 500 μs. The Indicators for this model are 1 green/red module status indicator 1 green/red SA power status indicator 8 yellow/red I/O status indicators .

The Allen-Bradley/Rockwell Automation 1756-L81EK controller is a ControlLogix 5580 series standard controller. It can handle up to 32 tasks simultaneously with up to 1000 programs per task. The 1756-L81EK standard controller can communicate through several different networks such as the Synchlink, Remote I/O, DeviceNet, ControlNet, Data Highway Plus, and the Ethernet/IP networks, and it supports several different third-party networks for maximum communication flexibility. Additionally, this controller can support Ethernet communication speeds of 10 Mbps, 100 Mbps, and 1000 Mbps. The 1756-L81EK standard controller weighs about 0.868 pounds and it is open-style equipment that does not have a protective enclosure.

The 1762-OF4 is MicroLogix 1200 analog output module. This module has Four (4) Voltage and Current channels. Applicable output voltage and current range are 0-10VDC and 4-20mA. Output signals may be used to drive modulating actuators and devices. This module is compatible for use with MicroLogix 1100 / 1200 and 1400 controllers.

The Allen-Bradley 1734-IE4S is a POINT I/O Safety Analog Input Module. It has 4 single-ended/module Inputs and a Input Type of Voltage, Current, or Tachometer with an Modes of Bipolar or Unipolar. This Safety Analog Input Module has an .

The 1734-VTMK, part of the Allen-Bradley Point I/O series, is a terminal base assembly that facilitates versatile and modular I/O for the PLC system, allowing for easy installation and expansion in a compact, efficient design. This facilitates streamlined data exchange and reliable performance in automated control environments.