AP Automation

The Siemens 6ES7132-7HB00-0AB0 is an electronic module for the ET200iSP distributed I/O system. It features 2 digital outputs (2 DO) with relays, capable of switching 60V UC at 2A. It's designed for use in hazardous areas with explosion protection ratings of Ex eb ib mb IIC T4 Gb and Ex eb ib mb I Mb, according to Parmley Graham.

The Allen-Bradley 1794-TB32 terminal base is a Flex I/O 1794 series terminal base unit. It is used to host different kinds of modules in complete Flex I/O systems. The 1794-TB32 terminal base unit supports panel mounting and DIN Rail mounting for itself and the module that it hosts. It has 32 I/O terminals, 8 common terminals, and 8 voltage terminals. The 1794-TB32 terminal base unit is open-style equipment with an IP 20 environmental protection rating.

The Allen-Bradley 1797-IE8 is a Flex Ex analog input module. This module has Eight (8) non-isolated analog inputs, capable of accepting input current ranges of 0-20mA and 4-20 mA. This module has Sixteen (16) bit resolution, with accuracy of 0.1% of output signal range at 20 °C (68 °F. The module’s IS input type is Ex ia IIB/IIC T4 AEx ia IIC T4 Class I, II, III Division 1 Group A-G T4 and IS module type of Ex ib IIB/IIC T4 AEx ib IIC T4 Class I, II, III Division 1 Groups A-D T4.

The Allen-Bradley 1746-IA8 module is a digital input module from the SLC 500 I/O modules series. It has the North American Hazardous Location Approval rating for safe operation in certain types of hazardous environments. The 1746-IA8 digital input module runs on AC voltage and it is rated for 100/120 Volts AC. It dissipates 0.27 Watts of heat per input point, 0.25 Watts of heat minimum, and 2.4 Watts of heat total. The 1746-IA8 digital input module has 8 digital inputs that are all in 1 group.

The Allen-Bradley/Rockwell Automation 1718-IJ module is a 1718 Ex I/O series digital input module. It comes with just 1 input channel. This module has a built-in protection rating of IP 20.

The Allen-Bradley 1785-L80E is an Allen-Bradley PLC5 Controller. This controller has 100K words of user memory, supports 3072 (any mix) or 3072 in + 3072 out (complementary). It has embedded communication ports such as Two (2) DH+/Remote I/O (Adapter or Scanner) One (1) serial port, configurable for RS-232 and 423 and RS-422A standards and One (1) Ethernet communication port.

The Allen-Bradley 1794-IH16 FLEX I/O module is a digital input module that operates with 125 Volts DC voltage. The Allen-Bradley 1794-IH16 FLEX I/O module comes with 16 I/O points. All of these I/O points are inputs and they are not isolated.

The Allen-Bradley 1756-M16SE is a ControlLogix SERCOS Interface module. This module supports up to Sixteen (16) drives and supports SERCOS data rate of 4 Mbps and 8 Mbps respectively. It has control modes including Physical, Velocity and Torque. It is installed to any slot of a 1756 Chassis.

The 1785-L80C controller is a ControlNet programmable controller that is manufactured by Allen-Bradley/Rockwell Automation in the PLC 5 series. It uses the ControlNet network to exchange data with I/O devices like variable speed drives, I/O racks, and HMI devices efficiently. The 1785-L80C programmable controller uses a battery for memory backup and there is a battery light that will indicate when the battery is low and needs to be replaced. The 1785-L80C programmable controller uses the Allen-Bradley 1784-KTCx communication interface card.

The Allen-Bradley 5069-L350ERMS2K controller is a Compact GuardLogix 5380 series industrial controller. It is equipped with 1 USB port and 2 Ethernet ports. The 5069-L350ERMS2K controller's 2 Ethernet ports can communicate at speeds of 10 Mbps, 100 Mbps, and 1 Gbps. Its operating temperature range is from 32 to 140 degrees Fahrenheit and its storage temperature range is from -40 to 185 degrees Fahrenheit. The 5069-L350ERMS2K controller has 5 MB of user memory and 2.5 MB of safety memory.