AP Automation

The Allen-Bradley 1756-M02AS is a ControlLogix Integrated Motion module. This module is used with Analog Servo interface drives with SSI feedback. It has two (2) axes per module and supports Position loop, Velocity loop for Torque; Position loop and for Velocity or Hydraulic. It has a gain resolution of 32-bit floating point with absolute position range 4,294,967,296 transducer counts and with user selectable rates of 500 Hertz, 666.7 Hertz, 1 Kilohertz, 2 Kilohertz, and 4 Kilohertz . This module directly installs to a ControlLogix chassis and it has a current draw of 700 milliamperes @ 5.1 Volts DC and 2.5 milliamperes @ 24 Volts DC.

The Allen-Bradley 1747-SDN is a DeviceNet communication scanner module used with SLC 500 series PLCs. It enables communication with DeviceNet devices, acting as a master on the network and connecting the PLC to up to 63 DeviceNet nodes. This module can also be used to bridge a DeviceNet network to another network in a pass-through configuration. 

The Allen-Bradley 5094-IB16 module is a Flex 5000 series input module. It features 16 sinking input channels. The 5094-IB16 sinking input module can support the Ethernet industrial communication network. It operates with an on-state voltage range of 18 to 32 Volts DC. The 5094-IB16 sinking input module can operate at a maximum altitude of 2000 meters above sea level without derating.

The Allen-Bradley 5094-OW8I output module from the Flex 5000 series is an isolated relay output module. It has 8 isolated relay output channels. The 5094-OW8I isolated relay output module can operate with AC voltage and with DC voltage. Its AC voltage range is from 5 to 240 Volts AC and its DC voltage range is from 5 to 125 Volts DC. The 5094-OW8I isolated relay output module has a maximum power dissipation rating of 3.5 Watts and a maximum thermal dissipation rating of 11.94 BTU per hour.

The Allen-Bradley 1746-P2 is a SLC 500 Power Supply. This Power Supply has a nominal Input Voltage of 120/220 Volts AC. It has an internal Current capacity of 5 A at 5V dc 0.96 A at 24V dc. It provides a 24VDC voltage output with built-in fuse protection.

The Allen-Bradley 1797-IE8H FLEX Ex HART I/O Module has 8 Inputs and a Single-ended Non-isolated Input Type. It operates with a 15V @ 22mA Functional Data Range and a 16 bits Resolution.

The 1761-L16AWA is a MicroLogix Controller under the Bulletin 1761 product family. This compact controller features 1K memory, integrated RS232 communication port, Sixteen (16) discrete inputs and Six (6) relay outputs.

The 1769-OG16 output module is one of the digital output modules that is available from the Allen-Bradley CompactLogix series. It operates on DC voltage. The 1769-OG16 digital output module is designed to be as compact as possible even though it has 16 output channels. I/O memory mapping can be used to configure this output module to meet the needs of its host system and the applications that it is intended for. The 1769-OG16 digital output module is an open type of module that does not have an enclosure unless it is installed inside one.

The Allen-Bradley 2098-DSD-010is an Ultra 3000 Multi-Axis Digital Servi Drive. This Digital Servo Drive requires an input voltage of 100-240VAC rms, 1-Phase with frequency of 47-63 Hz. It has a continuous output power of 1kWwith Continuous Output Current 5A and Intermittent Output Current of 15A.

The Allen-Bradley/Rockwell Automation 5069-L350ERM controller is a standard type of CompactLogix 5380 series controller. It features 5 MB of total user memory. The 5069-L350ERM standard controller can control 24 motion axes at a time. It can be used in an Ethernet network with up to 60 network nodes in it. The 5069-L350ERM standard controller has an operating temperature range from 0 to 60 degrees Celsius.

The 5094-OW4ISXT is a Safety Digital 4-point Isolated Relay Output Module manufactured by Allen-Bradley which has Output ratings (OUT), max of 5...30V DC, 2A/channel, 5...30V DC, 4A/channel (channel 0 & 1 only, 2 & 3 unused), 125/240V AC, 50/60 Hz, 2A/channel, an Output delay time, max for Off to On and On to Off of 20 ms, 10 ms, and an Safety Integrity Level of Up to and including Cat. 4 / PL e acc. to EN ISO 13849-1, SIL CL 3 acc. to IEC 62061, SIL 3 acc. to IEC 61508. as well as an Safety Reaction Time (SRT) of 20 ms. The Outputs for this module is 4 - Form A (normally open), and the Output voltage range is 5...125V DC and 5...240V AC. The for this model are .

The Allen-Bradley/Rockwell Automation 5094-IF8IHXT module is an Analog HART input module for FLEX 5000 series I/O modules. It has 8 individually isolated input channels and it is rated for an extreme (XT) environment.