AP Automation

The 1794-TB3GS terminal base unit has been manufactured by Allen-Bradley in the Flex I/O 1794 product line. This terminal base has 40 total terminals that include 2 common terminals, 2 voltage terminals, and 36 I/O terminals. The 1794-TB3GS terminal base unit is a grounded and spring type of terminal base unit. It can operate in applications with power ratings of 2 Amps of current and 31.2 Volts DC voltage. The 1794-TB3GS terminal base unit can operate at -4 to 158 degrees Fahrenheit at 5 to 95% relative humidity.

The 2080-LCD module is an Allen-Bradley/Rockwell Automation LCD module with an LCD screen and a keypad. It is part of the Micro 800 series. The 2080-LCD LCD module is meant to be hosted by a larger Allen-Bradley Micro 800 series controller, and it is meant to provide that controller with an LCD to display data. The keypad on this module controls the LCD screen. The 2080-LCD LCD module meets the T5 North American temperature code rating, its operating temperature range is -4 to 131 degrees Fahrenheit, and its storage temperature range is -40 to 185 degrees Fahrenheit.

Allen Bradley 2080-SERIALISOLK module is an Allen-Bradley Micro 800 series plug in module with isolated serial ports. Its isolated serial ports are RS232/485 types of serial ports. The 2080-SERIALISOL isolated serial port module can be used in non-hazardous locations and in hazardous locations that are rated as Class I, Division 2, Groups A, B, C, and D types of hazardous locations. This module needs to be protected from electrostatic discharge. The 2080-SERIALISOL isolated serial port module is easy to plug into a host controller with screws and it will not increase the footprint of the controller.

The 1756-RM2K module is a redundancy module. It has been designed and manufactured by Allen-Bradley/Rockwell Automation in the ControlLogix series for use in a ControlLogix system. The 1756-RM2K redundancy module is typically the only redundancy module that is supported and required by a ControlLogix chassis at a time. It can be used in systems that support the Ethernet network. The 1756-RM2K redundancy module has current draw ratings of 1.16 Amps at 5.1 Volts DC and 3.4 milliamps at 24 Volts DC.

The 22B-E9P9F104 adjustable frequency drive is an Allen-Bradley/Rockwell Automation adjustable frequency drive from the PowerFlex 40 series. It comes in a Size C frame and it is compatible with a variety of protective enclosures. The 22B-E9P9F104 adjustable frequency drive can be installed in an enclosure with a minimum protection rating of IP 20 and a maximum environmental protection rating of IP 65. Its normal operating temperature range is from -10 to 40 degrees Celsius. The 22B-E9P9F104 adjustable frequency drive’s 3-phase input voltage rating is 600 Volts AC at 50 to 60 Hertz.

The Allen-Bradley 22B-B012F104 drive is an adjustable frequency drive that has been manufactured as part of the Allen-Bradley PowerFlex 40 series. It operates with a 3-phase AC input voltage rating of 240 Volts AC. The 22B-B012F104 adjustable frequency drive also operates with an output current rating of 12 Amps and an output power rating of 3 Horsepower or 2.2 kilowatts. It is designed to be flange-mounted inside an IP 20 rated enclosure. The 22B-B012F104 adjustable frequency drive should only be used in clean indoor environments.

The Allen-Bradley/Rockwell Automation 22D-E3P0N104 drive is an adjustable frequency drive that is used to control the speed and torque of motors in PLC systems. It has been designed and manufactured as part of the Allen-Bradley PowerFlex 40P drive series. The 22D-E3P0N104 adjustable frequency drive uses 600 Volts AC 3-phase input voltage to operate. It can be installed inside of an IP 20 rated open enclosure when it is flange-mounted in its host PLC system. The 22D-E3P0N104 adjustable frequency drive can support an output current rating of 3 Amps.

The Allen-Bradley/Rockwell Automation 22A-A2P3F104 drive is an AC-powered industrial drive from the PowerFlex 4 series. It comes with a Size A frame and an IP 20 rated enclosure which protects it from small amounts of dust and dirt. The 22A-A2P3F104 AC drive can be mounted on a flange and it can be installed in an enclosure with a higher environmental protection rating than IP 20 if it needs a higher degree of protection against dust and liquids. It has a brake, but no filter. The 22A-A2P3F104 AC drive’s single-phase input voltage rating is 240 Volts AC at 50 to 60 Hertz.

• CE EAC IC
• S C-H5D36117
• FS: 01

The Allen-Bradley 1769-L18ER-BB1B is a CompactLogix 5370 L1 controller. It is part of the CompactLogix Programmable Automation Controller (PAC) product family which features built-in Two (2) Ethernet communication ports and 512Kbytes embedded user memory. Up to Eight (8) 1734 Point I/O modules may be installed with this controller.

The Allen-Bradley 1769-L16ER-BB1B is a CompactLogix controller that is part of the 5370 L1 CompactLogix Programmable Automation Controller (PAC) family. This controller has Two (2) Ethernet communication ports, with 384Kbytes user memory and supports installation up to Six (6) 1734 Point I/O modules.

• Central Processing Unit 125kB
• 6D1/6DO. Transistor, 2AI/1A0
• 2VDC, 2.5kW, 1xRS485
• 2xOPT. SLOT. SCREW TERMINALS

• DC-UPV-Modul 15
• STROMVERSORGUNG
• Input: 24 V DC/16 A 
• output: 24 V DC/15 A 
• S Q6V4333180

The Allen-Bradley 1746-NO4V is a four-channel analog voltage output module for the SLC 500 PLC series. It provides four independent channels capable of outputting a voltage range of -10 to +10 VDC. 

The Allen-Bradley 1746-NO4I is an SLC 500 analog output module with four channels, providing 0 to +20mA current outputs. It's used in automation applications and is designed for use with SLC 500 fixed or modular hardware. This module allows for precise control of analog devices, such as modulating valves or instruments, by converting PLC signals into 0 to 20mA current outputs. 

The Allen Bradley 1769-L36ERM is a CompactLogix controller with embedded 3MB memory, two Ethernet ports, and one USB port. It supports up to 30 Compact I/O modules, three expansion banks, and 16 axes of motion over Ethernet I/P. The controller is designed for DIN rail mounting and can operate in temperature ranges of 0 to 60 degrees Celsius and humidity ranges of 5 to 95% without condensation.