AP Automation

The SIEMENS 6ES7134-4FB01-0AB0 is a SIMATIC DP electronic module for the ET 200S I/O system. Specifically, it's an analog input module with two channels, designed for measuring voltage signals. It supports input ranges of +/- 10V (13 bit + sign), +/- 5V (12 bit + sign), and 1..5V (12 bit). The module has a cycle time of 65 ms per channel and includes an SF (group fault) LED. 

The Siemens 6ES7 134-4MB02-0AB0 SIMATIC DP module is a 2-channel analog input module with high features for ET 200S distributed I/O systems. It supports 2/4-wire analog inputs with a 15-bit resolution and a cycle time of 0.5ms. The module also includes diagnostic features like wire-break detection and a group error SF (red) LED. 

The Siemens 6ES7134-4GD00-0AB0 is a SIMATIC DP electronic module for the ET 200S distributed I/O system. Specifically, it's an analog input module (4AI) with a 2-wire interface designed for 4-20mA signals and a 13-bit resolution. It's 15mm wide and suitable for use with 2-wire transducers. The module has a cycle time of 40 ms per module and includes an SF (group fault) LED. 

This module provides 16 fail‑safe digital inputs at 24 V DC, designed for use with the S7‑1200 safety PLC system.  It supports PROFIsafe communication, enabling safety integration up to Performance Level E (PL E) under ISO 13849‑1 and SIL3 under IEC 61508. The input voltage range is 20.4‑28.8 V DC. Typical power loss is about 7 W.  Module width is 70 mm; protection class is IP20.  LEDs indicate individual input status and diagnostic faults.