AP Automation

The Allen-Bradley 2097-V33PR5-LM is a Kinetix 350 Single Axis Ethernet I/P Indexing servo drive. This drive has an AC input voltage requirement of 80-132VAC, 1-phase, 80-264VAC, 1-Phase and 80-264VAC, 3-Phase. This drive has continuous output current of 11.3 A. This drive features a safe Torque-Off functionality.

The Allen-Bradley 2097-V33PR6-LM is a Kinetix 300 Ethernet I/P Single Axis servo drive. This drive has an AC input voltage requirement of 80-132VAC, 1-phase, 80-264VAC, 1-Phase and 80-264VAC, 3-Phase. This drive has continuous output current and power of 17.0 A and 3.0 kW respectively. This drive features a safe Torque-Off functionality.

The Allen-Bradley/Rockwell Automation 20AB022C3AYNANC0 PF70 is a 7.5 horsepower drive. This adjustable frequency drive is a 5.5 kW drive. Also, this AC drive comes with a rating of 22 Amp and needs 240 VAC 3 phase power. It comes with a wall/machine mount (IP66) enclosure rating. This PF70 comes with an enhanced card installed on the drive.

The 22B-E1P7F104 drive is an AC-powered adjustable frequency drive. It has been manufactured by Allen-Bradley/Rockwell Automation within the PowerFlex 40 drive series. The 22B-E1P7F104 adjustable frequency drive is designed to operate with a 3-phase input voltage rating of 600 Volts AC at 50 to 60 Hertz frequency. Its output current rating is 1.7 Amps and its output power rating is 1 Horsepower or 0.75 kilowatts. The 22B-E1P7F104 adjustable frequency drive can operate in a temperature range from -10 to 40 degrees Celsius or 14 to 104 degrees Fahrenheit.

The 22B-B012H204 drive is an adjustable frequency drive from the Allen-Bradley/Rockwell Automation PowerFlex 40 series. It comes in an IP 20 rated open enclosure for protection and it does not have a filter. The 22B-B012H204 adjustable frequency drive uses 3-phase AC voltage to operate and its input voltage rating is 240 Volts AC. It can operate in an ambient temperature range from -10 to 55 degrees Celsius at 5 to 95% non-condensing relative humidity. The 22B-B012H204 adjustable frequency drive supports 3 Horsepower of maximum output power.

The Allen-Bradley/Rockwell Automation 22D-B8P0H204 drive is a PowerFlex 40P series AC-powered adjustable frequency drive. It is used to control a variable speed motor’s operating speed and torque ratings with as little friction as possible. The 22D-B8P0H204 adjustable frequency drive generates 2 Horsepower or 1.5 kilowatts of output power during operation. Additionally, it operates with 240 Volts AC 3-phase input voltage and with 50 to 60 Hertz of input frequency. The 22D-B8P0H204 adjustable frequency drive has a Size B frame, but it does not have a filter.

The Siemens 6SL3210-1SE24-5UA0 is a SINAMICS S120 converter power module PM340. It has an input of 380-480V 3AC at 50/60Hz and an output of 3AC at 45A (22kW). It is designed in a blocksize frame size FSD and uses internal air cooling. This module is part of the SINAMICS S120 series, known for its modular motion control drives, suitable for high-performance applications in mechanical and systems engineering.

The 5094-AENSFPRXT adapter module is an Allen-Bradley Ethernet adapter module from the FLEX 5000 series. It is designed to provide Ethernet support to Allen-Bradley FLEX 5000 series input and output modules. The 5094-AENSFPRXT Ethernet adapter module can work with as many as 8 input and output modules at a time. It can be used in a linear, star, or DLR type of Ethernet network. The 5094-AENSFPRXT Ethernet adapter module supports Ethernet communication speeds of 10 Mbps, 100 Mbps, or 1 Gbps.

The Allen-Bradley/Rockwell Automation 1769-CRL1 cable is an extension cable from the Allen-Bradley CompactLogix series of controllers and accessories. It is specifically a right to left bus extension cable. The 1769-CRL1 right to left bus extension cable is only 1 foot long, making it one of the shortest cables that is available from the CompactLogix series. It can be used to connect Allen-Bradley CompactLogix controllers to Allen-Bradley MicroLogix 1500 controllers. The 1769-CRL1 right to left bus extension cable comes with termination caps.

The Allen-Bradley/Rockwell Automation 1794-TB3TSK  terminal base unit has been designed as part of the Flex I/O 1794 series. It has spring clamp types of terminations. The 1794-TB3TS terminal base unit can support Allen-Bradley Flex I/O 1794 series temperature modules. It can be used in applications with voltage ratings of up to 125 Volts AC/DC. The 1794-TB3TS terminal base unit has a maximum current capacity of 10 Amps and it fits into wiring categories 2, 3, and 4.

The Allen-Bradley 2080-LC20-20QWB is a is a Micro 820 Programmable Logic Controller (PLC). This controller has Twelve (12) 24VDC. VAC discrete inputs; Seven (7) Relay outputs; Four (4) 0-10V (shared with 24V DC) analog input channels and One (1) 0-10VDC analog output channel. This controller is powered by an external supply voltage of 120VAC / 240VAC. It has One (1) Ethernet I/P communication port and One (1) RS232/485 non-isolated, CIP Serial, Modbus RTU, ASCII communication port.

The Allen-Bradley 2097-V33PR3 is a Kinetix 300 Ethernet I/P Indexing servo drive. This drive has an AC input voltage requirement of 80-132VAC, 1-phase, 80-264VAC, 1-Phase and 80-264VAC, 3-Phase. This drive has continuous output current and power of 5.7 A and 1.0 kW respectively. This drive features a safe Torque-Off functionality.

The Allen-Bradley 2097-V31PR0-LM servo drive is a single-axis servo drive from the Kinetix 350 series. It supports the Ethernet/IP industrial network. The 2097-V31PR0-LM single-axis servo drive supports 120 Volts or 240 Volts single-phase voltage. It comes with a safe torque-off feature and it supports the doubler mode at 120 Volts single-phase voltage. The 2097-V31PR0-LM single-axis servo drive dissipates up to 28 Watts of power during normal operation.

The 2097-V33PR3-LM is a Kinetix 350 Ethernet I/P servo drive. This is a single-axis servo drive with an AC input voltage range of 80-132 VAC rms, 1-phase; 80-264 VAC rms, 1-Phase and 80-264 VAC, 3-phase while the input frequency range remains at 48-62 Hz. This drive has continuous output current and power of 4 A and 1.00 kW respectively. This servo drive comes with an integrated Safe Torque Off (STO) feature.

The Allen-Bradley 2094-AM03-S is a Kinetix 6000 axis module. This axis module has a 230VAC voltage rating and continuous output rating of 5.5 kW, 25 A with single slot usage. Up to Seven (7) 2094-AM01-S may be used for each Eight (8) axis power rail.

The Allen-Bradley 2094-BM03-M is a Kinetix 6000 Drive component. This module is a 400VAC class Axis Module with continuous current of 21.2 A and peak current of 53.0 A. It has an efficiency of 98% and short-circuit current rating of 200,000 A (rms) symmetrical.

The 2094-SE02F-M00-S1 control module by Allen-Bradley/Rockwell Automation comes with a Safe Speed Monitor feature and a single Ethernet port. The Bulletin 2094 module is compatible with the Allen-Bradley Logix 5000 controllers and it has a fiber-optic Sercos interface.

The 2198-H070-ERS is a Kinetix 5500 Servo Drive. This Servo Drive is compatible with AC input supply voltages of 195…264V rms, 3-phase with 240VAC nominal and 324…528V rms, 3-phase with 480VAC nominal. This servo drive has Continuous output current (rms) of 23.0 A, peak output Current of 57.5 A and output power of 7.0kW - 14.6 kW depending on the input voltage supply.