AP Automation

The Allen-Bradley 1769-AENTRKis a CompactLogix communication module. It allows connection to Ethernet networks via the built-in Two (2) Ethernet communication ports, functioning as embedded switch and supporting Linear, Star and Device Level Ring (DLR) topologies. It supports transmission speed of 0/100 Mbps and 128 logical communications.

The 1734-IM2 module from Allen-Bradley/Rockwell Automation is a Point I/O 1734 series digital AC input module. Its AC voltage rating is 240 Volts. The 1734-IM2 digital AC input module is one of the smallest input modules available from the Point I/O 1734 series because it only has 2 inputs. The keyswitch on the mounting base for the 1734-IM2 digital AC input module needs to be rotated to position 8 for the module to be installed properly. This module has status indicators for the whole module, for the DeviceNet network, and for each of the 2 inputs.

The Allen-Bradley 1738-AENT Adapter is an ArmorPoint EtherNet/IP Series A Adapter. It has a maximum backplane current output of 1.0 Amp. This adapter has an enclosure type rating that meets the IP 65, 66, and 67 standards (when marked).

The Allen-Bradley/Rockwell Automation 2711P-T6C20D9 terminal is a Panelview Plus 6 series operator interface terminal that comes with extended features. It is controlled by a 6-inch touchscreen that supports color graphics. The touchscreen on the 2711P-T6C20D9 operator interface terminal can be activated by hand or with an approved type of stylus that will not scratch or puncture it. It supports RS-232 and Ethernet communication. The 2711P-T6C20D9 operator interface terminal is DC-powered and it comes with 256 MB of RAM and 512 MB of nonvolatile memory.

The Allen-Bradley/Rockwell Automation 5094-HSC module is a high-speed counter module that is available from the FLEX 5000 series. It is designed to be used as part of a complete FLEX 5000 system along with various input and output modules and an Ethernet adapter. The 5094-HSC high-speed counter module supports the Ethernet/IP industrial network. Its DC voltage ratings are 18 Volts DC minimum, 24 Volts DC nominal, and 32 Volts DC maximum. The 5094-HSC high-speed counter module can operate at -40 to 70 degrees Celsius or -40 to 158 degrees Fahrenheit.

The 5094-HSCXT is a High-speed Counter Module manufactured by Allen-Bradley which has an On-state voltage, min of 18V DC, an On-state voltage, nom of 24V DC, and an On-state voltage, max of 32V DC as well as an On-state voltage drop, max of < 0.3V DC. The On-state current, min for this module is 3 mA, and the Off-state voltage, max is 1.5V. The Voltage categor y for this model are 24V DC source .

The Allen-Bradley 1756-L7SP is a GuardLogix controller. This controller is a safety partner controller that is paired with 1756-L71S, 1756-L72S, 1756-L73S primary controllers, forming 1oo2 safety architecture, rated up to and including Safety Integrity Level 3 (SIL 3), Performance Level e (PL e) functionality. This controller is located to the immediate slot, next to the primary controller. It has a user memory that corresponds to the memory of the primary controller, as well as communication ports and keyswitch. The 1756-L7SP has a double slot-width.

The Allen-Bradley/Rockwell Automation 1756-L81EK controller is a ControlLogix 5580 series standard controller. It can handle up to 32 tasks simultaneously with up to 1000 programs per task. The 1756-L81ESK standard controller can communicate through several different networks such as the Synchlink, Remote I/O, DeviceNet, ControlNet, Data Highway Plus, and the Ethernet/IP networks, and it supports several different third-party networks for maximum communication flexibility. Additionally, this controller can support Ethernet communication speeds of 10 Mbps, 100 Mbps, and 1000 Mbps. The 1756-L81EK standard controller weighs about 0.868 pounds and it is open-style equipment that does not have a protective enclosure.

The Allen-Bradley 1734-IJ is a POINT I/O Incremental Encoder Module. It has 1 Counter and a Input Frequency of 1 megahertz, 500 or 250 kilohertz with a Voltage Rating of 5 Volts DC. This Incremental Encoder Module has 50 Volts Continuous Isolation Voltage.

The 1734-IA2 input module is an Allen-Bradley/Rockwell Automation digital AC input module which is designed as part of the Allen-Bradley Point I/O 1734 module series. It is rated for a voltage of 120 Volts AC. The 1734-IA2 digital AC input module only has 2 input channels. These inputs are labeled as ?Input 0? and ?Input 1? and they each have a status indicator to show when they are operating or if there is an error in either input. The 1734-IA2 digital AC input module also has a module status indicator and a network status indicator to alert the users about any faults in the module as a whole or in the network.

The Allen-Bradley 1734-ADNX is a POINT I/O DeviceNet Adapter Module. It has 24 Volts DC Input Voltage and a Field Side Power of 400 milliamps with an Inrush Current of 6 amps. This DeviceNet Adapter Module has a 1000 milliamps POINTBus Current.

The Allen-Bradley 2097-V33PR1 is a Kinetix 300 Ethernet I/P Indexing servo drive. This drive has an AC input voltage requirement of 80-132VAC, 1-phase, 80-264VAC, 1-Phase and 80-264VAC, 3-Phase. This drive has continuous output current and power of 2.8 A A and 0.5 kW respectively. This drive features a safe Torque-Off functionality.

The 2711P-K10C4A9 terminal is an operator interface terminal that has been designed and manufactured by Allen-Bradley/Rockwell Automation. It is part of the Allen-Bradley Panelview Plus 6 series of operator interface terminals. The 2711P-K10C4A9 operator interface terminal functions as an interface between the users and the industrial machines or systems that the users are operating. It can control the machine that it is connected to and it can be used to monitor the progress of the machine�s applications. The 2711P-K10C4A9 operator interface terminal has a 10-inch color display screen and a keypad for input and control.

The Allen-Bradley 1747-L514 is a SLC 500 processor. This module is part of the modular style hardware that is installed in slot 0 of the 1746 chassis. It features a 4K memory and built-in DH485 communication interface. This processor has a backplane current draw of 0.090 A at 5VDC. It supports up to 3 I/O chassis and maximum of 30 slots.

The 1606-XLP72E power supply module from Allen-Bradley/Rockwell Automation is a member of the Bulletin 1606-XLP series of compact power supply modules. It is engineered to be small and efficient and it is designed primarily for low-power applications and systems because it only generates low levels of power. The continuous output power rating of the 1606-XLP72E compact power supply module is 72 Watts. It supports multiple input voltage ranges for different applications, including 100 to 120 Volts AC, 220 to 240 Volts AC, and 220 to 375 Volts DC. The voltage that the 1606-XLP72E compact power supply module uses is single-phase voltage, regardless of the input voltage range which is used.

Allen Bradley 1606-XLE240ERZ power supply module from Allen-Bradley/Rockwell Automation is an ?essential? power supply module from the Bulletin 1606 series. Because it is an essential power supply module from the 1606 series, it is designed to be as slim as possible with only the most basic and essential features, making it highly cost-effective, easy to install, and easy to use. The 1606-XLE240E essential power supply module can operate with steady state input current ratings of 4.34 Amps at 120 Volts AC and 2.23 Amps at 230 Volts AC. This power supply module is a single-phase module. It has input voltage ranges of 100 to 120 Volts AC or 200 to 240 Volts AC and an output voltage range of 24 to 28 Volts DC.

The Allen-Bradley 1718-IF4HB analog input module is a HART analog input module. It is part of the Allen-Bradley 1718 Ex I/O series. The 1718-IF4HB HART analog input module has 4 inputs that can operate with 2-wire, 3-wire, or 4-wire transmitters.

The 1762-L40BXB programmable controller is an Allen-Bradley/Rockwell Automation MicroLogix 1200 series programmable controller. It has an input voltage rating of 24 Volts DC. The 1762-L40BXB programmable controller has 24 total inputs and 16 total outputs. The 24 inputs include 20 inputs that are rated at 24 Volts DC and 4 inputs which are fast 24 Volts DC rated inputs. The 16 outputs are 8 relay outputs, 7 FET outputs that are rated at 24 Volts DC, and 1 high-speed FET output that is rated at 24 Volts DC.

The Allen-Bradley 2085-OW16 is a Micro800 relay output module. This module features Sixteen (16) AC / DC relay output channels that operate at nominal voltages of 120VAC, 240VAC, 240VAC, 24VDC and 125VDC. This module is compatible for use with Micro850 and Micro870 Programmable Logic Controllers (PLC).

The Allen-Bradley 1769-IT6 is Programmable Controller module that is part of the compact I/O series. This module is Thermocouple and millivolt input module that features Six (6) channels that is compatible with Thermocouple sensors J, K, T, E, R, N, S, B, N, C and CJC sensor and accepts +/- 50mV and +/-10mv with operating range of -50 to +50mV and -10 to +10mV signals. It is compatible for use with CompactLogix and MicroLogix controllers.

The 2711P-K15C4D9 operator interface terminal is an Allen-Bradley/Rockwell Automation operator interface terminal. It has been designed and manufactured as part of the Bulletin 1500 product line within the Allen-Bradley Panelview Plus 6 terminal series. The 2711P-K15C4D9 operator interface terminal is a DC-powered terminal that operates at 18 to 32 Volts DC. Its memory includes 512 MB of RAM and 512 MB of nonvolatile memory. Additionally, about 79 MB of the 2711P-K15C4D9 operator interface terminal�s nonvolatile memory is user memory.

The Allen-Bradley 1790-0B16X is a 16-point, 24V DC sinking digital input module from the ArmorBlock I/O series. It features four M12 quick-disconnect field connectors, grouping four inputs per connector. Designed for harsh environments, its IP67-rated enclosure allows direct machine mounting without an additional cabinet. The module communicates over a DeviceNet network, enabling the collection of data from field devices like proximity sensors and push buttons. It can be mounted directly or on a DIN rail with an adapter. This model has been declared obsolete by Rockwell Automation and is no longer in production.

The 1606-XLE80E power supply module is a Bulletin 1606-XLE essential power supply module that is available from Allen-Bradley/Rockwell Automation. It is compact and cost-effective, but this also means that it only comes with the most basic set of power supply features. The input voltage ratings of the 1606-XLE80E essential power supply module are 100 to 120 Volts AC and 200 to 240 Volts AC. The output power ratings of this power supply are 24 to 28 Volts DC of output voltage, 80 Watts of output power, and 3.3 Amps of output current. The 1606-XLE80E essential power supply module is CE certified and its maximum steady state current rating is 1.5 Amps at a voltage rating of 120 Volts AC.

The Allen-Bradley 1606-XLE120EE module is manufactured as part of the Bulletin 1606 power supply product line and it is designed as an essential type of 1606 power supply module with a slim and compact build that contains all the key features of a power supply but no built-in special features. It is designed to be as simple as possible and designed for a long operating lifespan. The steady-state input current rating of the 1606-XLE120EE power supply module is 1.17 Amps at 230 Volts AC. Its input voltage is 180 to 264 Volts AC and its output voltage is 24 to 28 Volts DC. The 1606-XLE120EE essential power supply module?s output power rating is 120 Watts.

The 1606-XLE240E power supply module from Allen-Bradley/Rockwell Automation is an ?essential? power supply module from the Bulletin 1606 series. Because it is an essential power supply module from the 1606 series, it is designed to be as slim as possible with only the most basic and essential features, making it highly cost-effective, easy to install, and easy to use. The 1606-XLE240E essential power supply module can operate with steady state input current ratings of 4.34 Amps at 120 Volts AC and 2.23 Amps at 230 Volts AC. This power supply module is a single-phase module. It has input voltage ranges of 100 to 120 Volts AC or 200 to 240 Volts AC and an output voltage range of 24 to 28 Volts DC.

The Allen-Bradley 1606-XLS240F power supply module is a Bulletin 1606 power supply module with an output voltage range of 48 to 56 Volts DC and a nominal output voltage rating of 48 Volts DC. The efficiency rating of this power supply module is 91.2% at 120 Volts AC and 92% at 230 Volts AC. The 1606-XLS240F power supply module meets the CE, C-Tick, and UL standards, and several other industrial standards as well. This module is made to be mounted on a DIN Rail and it has spring-clamp terminals that support quick connections. The 1606-XLS240F power supply module has input current ratings of 2.22 Amps at 120 Volts AC and 1.22 Amps at 230 Volts AC.

The 1606-XLP36C power supply from the Bulletin 1606-XLP series has been designed and manufactured by Allen-Bradley/Rockwell Automation. It is a single-phase type of power supply that is usually used in a parallel operation mode. The 1606-XLP36C power supply operates with steady state input current ratings of 0.65 Amps at 120 Volts AC and 0.4 Amps at 230 Volts AC. The output power ratings for this power supply are 2.8 Amps of current, 36 Watts of output power, and +/-12/15 Volts DC of output voltage. Additionally, the AC input voltage for the 1606-XLP36C power supply is 100 to 240 Volts AC and the DC input voltage is 110 to 300 Volts DC.