AP Automation

The 1794-TB32S terminal base is an Allen-Bradley/Rockwell Automation terminal base unit from the Flex I/O 1794 series. It comes with 48 total terminals that include 32 I/O terminals, 8 common terminals, and 8 voltage terminals. The 1794-TB32S terminal base unit is a spring clamp type of terminal base unit. It can operate with a maximum voltage capacity of 31.2 Volts DC and a maximum current capacity of 10 Amps. The 1794-TB32S terminal base unit supports solid and stranded copper wire with a gauge of 22 to 12 AWG.

The 2080-IQ4OV4 input and output module is an Allen-Bradley/Rockwell Automation digital input and output module from the Micro 800 series. It has 4 sink and source inputs and 4 sink outputs. The 2080-IQ4OV4 digital input and output module operates in a wide ambient operating temperature range from -20 to 65 degrees Celsius and it can be stored in a wide temperature range from -40 to 85 degrees Celsius. The on-state voltage range for this module is from 9 to 30 Volts DC. The 2080-IQ4OV4 digital input and output module has the North America Hazardous Location Approval rating.

The 2711P-B10C22D9P-B display terminal is an Allen-Bradley/Rockwell Automation display terminal from the Panelview Plus 7 Performance series. The 2711P-B10C22D9P-B display terminal supports the Ethernet/IP industrial network. It is used to control machines that are connected to either Allen-Bradley ControlLogix or Allen-Bradley CompactLogix 5370 controllers through the Ethernet/IP network. The 2711P-B10C22D9P-B display terminal can be controlled with a touchscreen or a keypad.

The Allen-Bradley 2711P-T6M20A8 is an Allen-Bradley PanelView Plus 6 600 Operator Terminal. This operator terminal is powered by an external 100-240VAC supply voltage and has a 5.7-inch grayscale display with embedded Ethernet, RS-232 and Two (2) USB ports. This operator terminal has a keypad and touchscreen input interface.

The Allen-Bradley 1734-IB4 is a POINT IO module that features Four (4) sinking input channels that operates with 12/24VDC voltage category. It may be used with any POINT IO communication adapter and POINTBlock IO modules for implementing distributed I/O architecture. This Digital DC Sinking Input Module has a 1 Watt Power Dissipation with input current of 5 mA.

The 5094-AEN2SFPR is a FLEX 5000 EtherNet/IP Adapter with RJ45 Ports manufactured by Allen-Bradley which has Voltage and current ratings, MP of 18...32V DC, 1730 mA, Voltage and current ratings, MP inrush of 18...32V DC, 5700 mA for 100 ms, and Voltage and current ratings, backplane of 15V DC, 1800 mA. The Power dissipation, max for this module is 7 W @ 18V DC, and the Thermal dissipation, max is 23.9 BTU/hr @ 24V DC. The Isolation voltage for this model is 300V (continuous), Basic Insulation Type. Tested @ 2121V AC for 60 s, Power to Backplane. Tested @ 4242V DC for 60s, Power to Ethernet ports. No isolation between communication ports. .

The Allen-Bradley/Rockwell Automation 2711P-RDT12CK terminal is a Panelview Plus 1250 series operator interface terminal. This terminal is controlled by a touchscreen. The screen on the 2711P-RDT12CK operator interface terminal supports 18-bit color graphics. There is no antiglare shield on the screen, but the whole terminal is protected from liquids and corrosion by a conformal coating. The 2711P-RDT12CK operator interface terminal is a display terminal that connects to a logic module to form a complete control system.

The Allen-Bradley 1756-IF16H input module is a ControlLogix HART type of analog input module. It is used to connect a Logix controller to an industrial machine system. The 1756-IF16H analog input module operates by receiving signals from process value transmitter devices and converting them into measurement values such as temperature or pressure values that the Logix controller can use. It is designed to be mounted in a ControlLogix chassis with an RTB or removable terminal block that hosts all of its field side wiring. The 1756-IF16H analog input module has a separate HART modem for each input channel.

The Allen-Bradley 1606-XLS120E power supply module is a switched mode power supply module that has been designed to be ultra small. It is a member of the Allen-Bradley Bulletin 1606 product line of power supplies and power supply accessories. The 1606-XLS120E switched mode power supply module can be mounted on a DIN Rail and it uses single-phase input voltage. It is rated for 24 Volts DC and 5 Amps of nominal output power. The 1606-XLS120E power supply module features 100 to 240 Volts AC input voltage at 50 to 60 Hertz, 110 to 300 Volts DC input voltage, and an operating temperature range of -25 to 70 degrees Celsius.

The Allen-Bradley 1606-XLE120F is part of the Essential Switched Mode Power Supply product category. It requires an input power of 200-240V AC Voltage with Output Voltage of 24 to 24VDC along a 120W Output Power and Current of 5 Amperes at 24VDC and 4.3 Amperes at 28VDC.

The Allen-Bradley 1756-M08SEK is a ControlLogix Serco Interface Module. This module supports up to Eight (8) drives with SERCOS data rate of 4 Mbps and 8 Mbps. This module supports Position, velocity, and torque drive control modes and compatible with 2093 Kinetix 2000 multi-axis servo drive, 2094 Kinetix 6000 multi-axis servo drive, 2099 Kinetix 7000 high-power servo drive and 2098 Ultra3000 SERCOS servo drive.

The Allen-Bradley/Rockwell Automation 2711P-B6C5A9 terminal is an AC-powered operator interface terminal. It has been designed and manufactured as part of the Allen-Bradley Panelview Plus 6 series of interface terminals. The 2711P-B6C5A9 operator interface terminal can be used to control a variety of machines and applications through its touchscreen and keypad. The 2711P-B6C5A9 operator interface terminal�s input voltage rating is 100 to 240 Volts AC.

The 2715P-B15CD-B is a 15-inch operator terminal that has been designed to provide a visualization of an application process to the users. This terminal has been developed and produced by Allen-Bradley.

The Allen-Bradley 1790-T8BV8B is an 8-port, unmanaged industrial Ethernet switch from the ArmorPoint series. It features eight 10/100 Mbps auto-negotiating ports with RJ45 connectors for connecting devices like PLCs, HMIs, and drives. Housed in a rugged, IP67-rated cast aluminum enclosure, it is designed to withstand harsh environments without needing a control panel. It operates on a wide-range 24V DC power input and can be mounted directly on a machine. Like other 1790 switches, it is plug-and-play, requiring no configuration, and provides diagnostic LEDs for status and network activity. This model is now obsolete.

The Allen-Bradley 1606-XLS480E is a Performance power supply. This power supply has an input voltage rating of 3-Phase, 380-480VAC, with rated output voltage of 24-28VDC, output current of 20 A and output power of 480 Watts.

The 1606-XLS960E-3 power supply is an Allen-Bradley/Rockwell Automation Bulletin 1606-XLS series switched mode power supply module. Its output voltage rating is 24 to 28 Volts DC and its input voltage rating is 380 to 480 Volts AC. The 1606-XLS960E-3 power supply module supports 3-phase voltage. The output power rating of this switched mode power supply module is 960 Watts, making it one of the more powerful power supplies from the Allen-Bradley Bulletin 1606-XLS product line. The 1606-XLS960E-3 switched mode power supply module is designed to be mounted on DIN Rail.